York H*RA036 THRU 090 Bedienungsanleitung PDF herunterladen

TECHNICAL GUIDE

SPLIT-SYSTEM AIR CONDITIONERS

10 SEER

MODELS:

H*RA018 THRU 060

(1.5 THRU 5 NOMINAL TONS, 1 PH)

H*RA036 THRU 090

(3 THRU 7.5 NOMINAL TONS, 3 PH)

MODELS: 018 - 060 (1 PH & 3 PH)

MODELS: 076 - 090 (3 PH)

Due to continuous product improvement, specifica-

tions are subject to change without notice.

Visit us on the web at www.york.com for the most

up-to-date technical information.

Additional rating information can be found at

www.ariprimenet.org.

CERTIFICATION APPLIES ONLY

WHEN THE COMPLETE

SYSTEM IS LISTED

WITH ARI.

LISTED

036-21121-002 Rev. A (0602)

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

DESCRIPTION

The 10 SEER Series condensing unit is the outdoor part of a

versatile system of air conditioning. It is designed to be cus-

tom-matched with one of UPG’s complete line of evaporator

sections, each designed to serve a specific function. Match-

ing Air Handlers are available for upflow, downflow or hori-

zontal applications to provide a complete system. Electric

Heaters are available if required. Add-On coils are available

for use with upflow, downflow or horizontal furnaces and air

handlers.

WARRANTY

Single Phase Units:

5-year limited parts warranty.

5-year limited compressor warranty.

Three Phase Units:

1-year limited parts warranty.

5-year limited compressor warranty.

FEATURES

• QUALITY CONDENSER COILS - The coil is constructed

of enhanced copper tube and aluminum fins.

• COIL PROTECTION - Coils are protected from damage by

a polymer mesh applied between the coil face, and a PVC

coated steel coil guard.

• PROTECTED COMPRESSOR - The compressor is inter-

nally protected against high pressure and temperature.

This is accomplished by the simultaneous operation of

high pressure relief valve and a temperature sensor which

protects the compressor if undesirable operating condi-

tions occur. A liquid line filter-drier further protects the

compressor.

• DURABLE FINISH - The cabinet is made of pre-painted

steel. The pre-treated flat galvanized steel provides a bet-

ter paint to steel bond, which resists corrosion and rust

creep. Special primer formulas and matted desert sand fin-

ish insure less fading when exposed to sunlight.

• LOWER INSTALLED COST - Installation time and costs

are reduced by easy power and control wiring connec-

tions. Discharge line heat exchanger knockouts are pro-

vided, if required. Available in sweat connect models only.

The unit contains enough refrigerant for matching indoor

coils and 15 feet of interconnecting piping. The small base

dimension means less space is required on the ground or

roof.

• TOP DISCHARGE - The warm air from the top mounted

fan is blown up away from the structure and any landscap-

ing. This allows compact location on multi-unit applica-

tions.

• LOW OPERATING SOUND LEVEL - The upward air flow

carries the normal operating noise up away from the living

area. The rigid top panel effectively isolates any motor

sound. Isolator mounted compressor and the rippled fins

of the condenser coil muffle the normal fan motor and

compressor operating sounds.

• LOW MAINTENANCE - Long life permanently lubricated

motor-bearings need no annual servicing.

• EASY SERVICE ACCESS - Fully exposed refrigerant con-

nections, a single panel covering the electrical controls

and the molex plug in the control box connecting the con-

denser fan, make for easy servicing of the unit.

• SECURED SERVICE VALVES - Secured re-usable ser-

vice valves are provided on both the liquid and vapor

sweat connections for ease of evacuating and charging.

• U.L. and C.U.L. listed - approved for outdoor application.

Certified in accordance with the Unitary Small Equipment cer-

tification program, which is based on ARI Standard 210/240.

1 2 3 4 5 6 ... 19 20

Inhaltsverzeichnis

Seite 1 - TECHNICAL GUIDE

TECHNICAL GUIDESPLIT-SYSTEM AIR CONDITIONERS10 SEERMODELS:H*RA018 THRU 060(1.5 THRU 5 NOMINAL TONS, 1 PH)H*RA036 THRU 090(3 THRU 7.5 NOMINAL TONS, 3 P

Seite 2 - 2 Unitary Products Group

036-21121-002 Rev. A (0602) 10 Unitary Products GroupMultipliers for determining the performance with other indoor section

Seite 3 - Unitary Products Group 3

036-21121-002 Rev. A (0602)Unitary Products Group 11Multipliers for determining the performance with other indoor sections.COOLING PERFORMANCE DATAAIR

Seite 4 - 4 Unitary Products Group

036-21121-002 Rev. A (0602) 12 Unitary Products GroupMultipliers for determining the performance with other indoor section

Seite 5 - Unitary Products Group 5

036-21121-002 Rev. A (0602)Unitary Products Group 13Multipliers for determining the performance with other indoor sections.1 Phase3 PhaseCOOLING PERFO

Seite 6 - DIMENSIONS - 3 Phase

036-21121-002 Rev. A (0602) 14 Unitary Products GroupMultipliers for determining the performance with other indoor section

Seite 7 - TYPICAL INSTALLATION

036-21121-002 Rev. A (0602)Unitary Products Group 15Multipliers for determining the performance with other indoor sections.COOLING PERFORMANCE DATAAIR

Seite 8 - 8 Unitary Products Group

036-21121-002 Rev. A (0602) 16 Unitary Products GroupMultipliers for determining the performance with other indoor section

Seite 9

036-21121-002 Rev. A (0602)Unitary Products Group 17Multipliers for determining the performance with other indoor sections.COOLING PERFORMANCE DATAAIR

Seite 10 - COOLING PERFORMANCE DATA

036-21121-002 Rev. A (0602) 18 Unitary Products GroupMultipliers for determining the performance with other indoor section

Seite 11

036-21121-002 Rev. A (0602)Unitary Products Group 19MATCHING INDOOR COMPONENTSG1UA1/2 CASEDUPFLOWG1HDHORIZONTAL DUCTG2FD*MULTI-POSITION(UPFLOW, HORIZO

Seite 12

036-21121-002 Rev. A (0602) 2 Unitary Products Group1. Rated in accordance with ARI Standard 110, utilization range “A”.2.

Seite 13

Seite 14

036-21121-002 Rev. A (0602)Unitary Products Group 3COOLING CAPACITY - With Air Handler CoilsUNIT MODELAIR HANDLERCOIL1MODELCOOLINGMODELELECTRIC2HEAT K

Seite 15

036-21121-002 Rev. A (0602) 4 Unitary Products GroupCOOLING CAPACITY - Upflow, Downflow, & Horizontal Furnaces and Coi

Seite 16

036-21121-002 Rev. A (0602)Unitary Products Group 5* Requires a 2FD Blower Time Delay unless a standard furnace is equipped with one.** Refer to Quick

Seite 17

036-21121-002 Rev. A (0602) 6 Unitary Products GroupNOTES: 1. For condensing unit only. Does not include effect of evapora

Seite 18

036-21121-002 Rev. A (0602)Unitary Products Group 7ACCESSORIES*Refer to Price Manual for specific model numbers.Hard Start Kit - Provides increased st

Seite 19 - MATCHING INDOOR COMPONENTS

036-21121-002 Rev. A (0602) 8 Unitary Products GroupTYPICAL FIELD WIRING - 1 Phase ApplicationTYPICAL FIELD WIRING - 3 Pha

Seite 20 - Group Drive 73069

036-21121-002 Rev. A (0602)Unitary Products Group 9Multipliers for determining the performance with other indoor sections.COOLING PERFORMANCE DATAAIR

Verwandte Modelle: H*RA018 THRU 060

Kommentare zu diesen Handbüchern

Keine Kommentare

York H*RA036 THRU 090 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Spülung York H*RA036 THRU 090 herunter. York H*RA036 THRU 090 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: H*RA018 THRU 060

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Spülung York H*RA036 THRU 090

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Spülung York HRA036 THRU 090 herunter. York HRA036 THRU 090 User Manual Benutzerhandbuch